Cationic Polyacrylamide Potassium CPAM for Drilling Fluid

General introduction

CPAM is a copolymer of acrylamide , potassium acrylate and organic cation monomer, with its molecular weight about 3 million to 8 million. Compared with cationic polyacrylamide, it has the characteristics of lower cost, better water loss effect. Compared with polyacrylamide potassium, it possesses better flocculating and cuttings carrying capacity.

Property Index

Items

Index

Appearance

White to yellowish free-flowing powder or granules

Moisture,%

≤10.0

purity ， %

≥80.0

Cationic degree ， %

≥10.0

Molecular weight

≥ 3.0× 10 6

Ralative expansion rate of reduction ， %

≥40.0

Base mud

A.V. ， mPa·s

5 ～ 7

P.V. ， mPa·s

3 ～ 5

Base mud + sample

A.V. ， mPa·s

≥18.0

P.V. ， mPa·s

≤ 18.0

Characteristics

•  Effectively coat cuttings, inhibit hydrous disintegration, and keep rule hole.

•  Grid structure of polymer can improve cutting carrying ability, which can keep hole clean.

•  Increase viscosity and improve rheology behavior.

•  Good compatibility, especially with sulfonates of tannin and sulfonateds of lignite and sulfonates of phenol resin.

•  Simple application method on site; directly added or mixed with water.

Method of application

Routine dosage is in the range of 0.1 ～ 0.3 ％ ,which is up to the condition under well.

Notes

This product should be stored in a cool, ventilated place to avoid the sun and rain. Flush with lots of water if splashing it into eyes.

Package

It is packed with plastic bag inside and compound bags outside, with net weight 25kg per bag.